Top Hacks To Clean Your Car Inside & Out

Does your car feel old and tired? The upholstery appears a little tattered, and the formerly gleaming windows are now…well, not so shiny. Sure, you could pay someone to clean your car &mdash —or save money by cleaning it yourself.

You can use these tried and true cleaning hacks to get your car clean, both inside and out. After researching we found some great websites that go into great detail. Be sure to visit them for more great tips

How to Clean and Restore Car Headlights

After a few years of usage, the plastic in car headlights oxidizes, causing them to become hazy and yellowish. That film can cause you not to see as well when driving at night. You can use this headlight restoration technique to clean and restore your headlights.

According to Family Handyman there is an easy 4 step process that will restore your headlights

Step 1 - Wash and Sand Horizontally

• Wash the cloudy headlight with warm soapy water.

• Rinse with plenty of clear water, then let it dry.

• Then mask the area around the lens so you don't scratch the paint.

• Soak the sheets of sandpaper in water, then start with the grit that suits your situation.

Sand in one direction.

With sandpaper, the higher the number, the finer the grit. If the headlight is just dull or yellowed, start with the 1,500 grit and work up to the 2,500 grit. If there are light scratches, start with the 1,000-grit paper.

Step 2 - Rinse and Sand Vertically

Rinse and change direction with the next grit. Keep doing this until you're finished with the 2,500-grit paper.

Step 3 - Buff the Lens with Polish

• Wash the headlight with plenty of clear, cool water and dry.

• Wet one corner of the flannel cloth with the polishing compound.

• Using firm pressure, polish the headlight in a circular pattern until it becomes smooth and clear.

Step 4 - Polish the Lens

• Allow the polish to dry, then use the clean end of the cloth to buff off any polish residue.

• Repeat the polishing process.

• Depending on the damage to the headlamp, small areas may still appear foggy. Try re-polishing only those spots with a polishing compound. Buff the area again and inspect. The lens should look perfectly clear!

• To keep foggy headlights clear, wash often with a mild detergent and a soft-bristle brush or sponge, flush with plenty of water and dry.

Never clean clear plastic with wax, polish or any chemical that's not formulated for the task. And that is how to clean headlights yourself!

Credit: Family Handyman

How To Clean Your Car Windows Streak Free

The key to getting your car windows clean and streak free is all about the tools and techniques you use. The great news is that it's not difficult to do, and once you learn how, you'll be able to get your car windows looking amazing in no time.

1. Use a clean, soft microfiber cloth or towel to avoid scratches.

2. When using a cleaning solution, make sure work in small sections

3. Start at the top and work your way down

4. Use a quality glass cleaner

5. Wipe in a circular motion

6. Use a second clean microfiber cloth to dry

7. Polish with a third clean microfiber cloth

How To Clean The Dashboard

The best things to clean your car dashboard according to DetailCentralAve are.

• Vacuum with Attachment

• Soft Microfiber Cloth

• Water and Mild Soap

• Toothbrush or Soft Paint Brush

• Polish

To begin, use your vacuum with brush attachments to vacuum the dash. Attempt to pick up any dust or debris on the dash.

Next, take a soft microfiber cloth, dipped in water, to wipe down your dash. If the interior of your car is particularly grimy, fill a bowl with warm water and mild soap. Use this to wipe the dashboard, steering wheel, hand brake, and interior plastic of your vehicle.

Likely, it will be difficult to clean in the small crevices and vents. Use a toothbrush, soft paintbrush, or designated dash brush to gently remove dirt. Be careful so you don’t scratch the delicate parts of your car.

Once your dash is clean and dry – you can use another dry microfiber cloth to rub down the dash if needed – you can add shine by polishing it. You can pick up a wide variety of polishes at automotive parts stores. Pick the polish of your choice and put a small amount onto a clean and dry cloth, then rub the cloth over the dash. Repeat until the entire dashboard is polished. You can polish the center console as well. If there is excess polish when you rsquo;ve finished, remove with a dry cloth.

Credit: DetailCentralAve

How To Remove Dead Bugs From Your Car's Exterior

The paint on your car's exterior is delicate. When you drive, bugs hit your car and can leave behind stains or etchings in the paint. You may not notice them right away, but over time these can become more visible and difficult to remove.

To remove dead bugs from your car's exterior, start by washing the area with soap and water. Then, using a soft cloth or sponge, gently scrub the affected area in a circular motion. If the stain is still visible, you can try using a mild abrasive cleaner or rubbing alcohol. Be sure to test any cleaner on an inconspicuous area of your car's exterior first to avoid damaging the paint.

Once you've removed the dead bug stains, be sure to wash and wax your car regularly to protect the paint and keep your car looking its best.

How To Check Your Antifreeze

It may not cross most people's minds, but checking your car's antifreeze protection level is an important part of regular maintenance. Anti-freeze helps protect your car from damage caused by cold weather, and keeping it at the proper level could save you from costly repairs down the road. In this article, we will show you how to check your car's antifreeze protection level and what to do if it needs to be adjusted.

What You Need

Before you begin, there are a few items you need for the job:

An anti-freeze tester: These are usually sold for just a few dollars at any auto parts store.

Paper towel or rag: This will help keep the anti-freeze off of surfaces like paint that could get damaged.

Ziplock bag: This will help keep dirt out of your anti-freeze tester while you’re not using it.

Step 1: Locate The Reservoir

The first step is to locate the reservoir where your car’s anti-freeze is stored. This is usually in the engine compartment, and it looks like a plastic container with a lid on top (as seen in Figure 1). There should also be a warning label telling you not to open the lid while the fluid is hot – so always make sure that your car has been sitting idle for at least two hours before proceeding! 

Step 2: Testing The Anti-Freeze

Now that you have located the reservoir, insert the end of your tester into the fluid (you may have to use a straw attached to the bottom of the tester). Then pump up and down until about half of the fluid has been drawn up into the glass chamber on top (Figure 2). Now look at how many “balls” are floating on top of the fluid; this number tells you how well protected your car is against extreme cold temperatures (see Table 1 below). Once done testing, pour any remaining liquid into its original container, then wipe off any residue with paper towel or rag. 

Step 3: Storing The Tester

After testing, take a ziplock bag and store your anti-freeze tester in it until its next use. This will help keep dust and dirt off of it when it’s not in use! And don't forget - always remember that antifreeze is poisonous so make sure none gets on any surfaces outside of its original container!   

Checking your car's antifreeze protection level doesn't have to be difficult or complicated; with these simple steps anyone can do it themselves! With regular testing every few months, you'll know exactly how well protected against extreme cold temperatures your vehicle really is - potentially saving yourself hundreds or thousands of dollars in repairs down the line!